Recently viewed tickets

Log out

[VIEW]     Various display options

From Main Menu select View > Display Option
1. Thickness of the plate element

2.To distinguish plate elements from beam elements

3.To show the outline of the Inactive elements

4. Display only to certain parts
If you enable the Display by Group option in the Display, only the information of the selected group is displayed.
In the figure below on left, the entire " live load surcharge" is displayed, while in the figure further below only a part of the upper slab loads as defined in a group is displayed

Display by Group options can be applied to loads as well as all display information that can be expressed in midas Civil.

5. Different colored elements depending on thickness

Creation date: 6/21/2016 6:32 PM ()      Updated: 9/4/2017 6:02 PM ()
2016_FAQ_Vol.1_image (1).jpg
48.8 KB resend
2016_FAQ_Vol.1_image (2).jpg
27.4 KB resend
2016_FAQ_Vol.1_image (3).jpg
54.5 KB resend
2016_FAQ_Vol.1_image (4).jpg
39.4 KB resend
2016_FAQ_Vol.1_image (5).jpg
52.3 KB resend
2016_FAQ_Vol.1_image (6).jpg
28.9 KB resend
72.7 KB resend
66.7 KB resend
Vol.1_04_Various display options .pdf
167.3 KB resend