[New] Design+ 2024 (v1.1) Installer & Patchs (v1.3)

1. Design+ 2024 (v1.1) Installer  (17. Nov. 2023)

   1) General Execution Files  : [Download]

   2) MSI Install                         : [Download]

   3) Batch Design Manual      : [Download]


    *** [New] Design+ 2024 (v1.3) Official Patch :[Download]
      Please use the official patch after overwriting the patch files into the existing "Design+" folder of Design+ 2024(v1.1).

       1. The error that Design+ crashed while performing the batch design has been fixed.
       2. The error in the purlin and girth roof type illustration has been fixed.
            (The numbering for the wind load area of the roof was partially incorrect.)
       3. An error in which the main rebar area in the column design was applied as 0.0 has been corrected. 

            (It occurred when using ACI318(M)-19 and member forces by load combination)


    *** Design+ 2024 (v1.2) Official Patch :[Download]

      Please use the official patch after overwriting the patch files into the existing "Design+" folder of Design+ 2024(v1.1).
      1. The error that Design+ was closed when generating a word report in batch design has been fixed.
    2. The error that the anchor length of the bolt was not created in the drawing in the “Post-installed Anchor Bolt” type has been fixed.
      3. The error that the roof images of flat and gable roofs were exchanged in a purlin design was fixed. 


2. Design+ 2023 (v1.2) Installer  (07. Mar. 2023)

1) General Execution Files (10. Mar. 2023)  : [Download]

2) MSI Install (10. Mar. 2023): [Download]

3) Patch (04. July. 2023)  : [Download]
    - Error in the calculation of strength reduction factor in the flexural design as per ACI-14
    - Error setting rib No. in base plate design.

3. Design+ 2023 (v1.1) Installer (19. Oct. 2022)

1) General Execution Files (21. Nov. 2022)  : [Download]

2) MSI Install  (09. Nov. 2022): [Download]

3) Patch (21. Nov. 2022)  : [Download]
    - Design+ was crashed when changing the design code at foot and composite beam.
    - Design+ was crashed when performing the base plate under Eurocode.
    - Error when calculating the modified moment in column desing. 

4. Design+ 2022 (v1.2) Installer (26. May. 2022)

1) General Execution Files  : [Download]

2) MSI Install: [Download]

 - Design+2022(v1.2) is patch program for Design+2022(v1.1).
So,If Design+2022 (v1.1) is already installed, download the patch program below and copy it to the existing Design+ folder.

[Tips]


***Click  [Download]  button for downloading installation files. 
After unzipping the files, run setup.exe. ***

***What is an MSI installer?****
 - It is not different with general execution files, 
- but, the process required for general installation is indeed simpler and faster. 
- Any auxiliary programs required for the execution of the program, like VC++ Redistributable Package, must be manually installed.
Creation date: 10/29/2020 1:37 PM      Updated: 4/9/2024 6:26 AM
get help Get help for this page