SV vehicles reserve factors

Question:

I'm working with MIDAS CIVIL 2020 V3.2 and would like to know how I can separate ALL model 2 from SV vehicles in the moving load case to be able to calculate the reserve factors.

Thanks

Answer:

Hi,

It is only provided after assessment to CS 454 as shown below.

However, I found a workaround as follows;

Define ALL model 2 with all lane factors equal to zero.

Define a moving load case using the combined SV 80 and ALL model 2 (all lane factors = 0). This load case will give you the effects of SV vehicle only. The effects of ALL model 2 only can be obtained by subtracting 'SV 80 Normal only' from 'SV 80 Normal'. Please refer to the attached file.

Regards,
DK Lee
Technical Manager

Click here to give FEEDBACK

Thanks

all model 2 reserve factor special vehicle

Creation date: 9/20/2020 7:50 PM Updated: 9/21/2020 5:21 AM

50 FT Concrete Spans without cantilevers - Assessment SV Vehicles Normal Speed 3 Spans.mcb

Files		Sort by Name Sort by Date
	50 FT Concrete Spans without cantilevers - Assessment SV Vehicles Normal Speed 3 Spans.mcb 880.9 KB
	50 FT test.mcb 900.6 KB
	DataImage19.png 30 KB
	DataImage42.png 239.3 KB
	DataImage53.png 71.1 KB
	DataImage63.png 35.9 KB