How to distribute the load in a plate in Midas Civil?
We can control the direction of distribution by a plate by using a different stiffness for the two directions. One way to achieve this is by using a stiffened plate, which can be defined from the Thickness Properties. In the image below you can see how the load distribution for a square plate under uniform load supported on all 4 edges has changed to one direction more than the other:
Or we can use Properties >> Plate Stiffness Scale Factor. In the image below you can see how if we reduce the stiffness in one direction, the loads will distribute in the other (arrangement as for the plate above, but using a uniform thickness plate with no stiffeners but with Plate Stiffness Scale Factor):