Issue with load group defined in additional step

Question:

Hi, Sir

[Kindly please refer to the attached model file.] 
Example for the stage CS3, we activate the relevant load group applied to the additional step being defined. After performing construction stage analysis and switch to the post-processing mode, the relevant loading data was disappearing in the work tree. Also relevant input information was missing in the load table. That's really odd. Please help to check this issue. Thank you!!

Best regards,



Answer:

Hi,

This is happening because the first step is the default in the post-processing mode but the last step is the default in the pre-processing mode. The load group is applied at the middle step of the CS3. Thus, it is shown in the pre-processing mode and not in the post-processing mode. In order to see the load group in the post-processing mode, you need to change the step to 'User step' or 'Last step' as shown below.


Regards,
DK Lee
Creation date: 10/8/2019 8:16 AM (dklee@midasit.com)      Updated: 10/8/2019 5:47 PM (dklee@midasit.com)
Files   
CS3_Post.jpg
resend
CS3_Pre.jpg
resend
DataImage80.png
resend
FCM-R2.mcb
resend